The problem

Radiator thermostats only know their own schedule. They do not know whether anyone is home, whether the window is open, when the room has to be warm or whether there is solar power to spare. So the empty house keeps heating, the bathroom is cold in the morning, and anyone who wants better builds automations that break with the next device change.

What room heating does

You create rooms, assign their thermostats and set a comfort temperature. For each room, two switches decide whether the schedule applies, presence, or both. Time windows are set per weekday, optionally with their own temperature. When nobody is home, the room drops to the base temperature – optionally based only on the people who belong to that room. It works with every thermostat Home Assistant knows as a climate device and regardless of the heat source: heat pump, gas, oil or district heating.

Kepler learns for every room how fast it heats up and how long it holds the heat. That makes preheating possible, so the room is warm when the time window starts – not an hour later. Hubble watches the outdoor temperature and the weather forecast and starts and ends the heating season by itself. Every decision is shown in plain language: “Someone is home”, “Open window detected”, “Lift due to solar surplus”.

A fixed order decides what counts

Window

An open window beats everything: the room goes to frost protection. With a window contact immediately; without one, room heating can detect the fast temperature drop while heating by itself.

For whom: anyone who airs the room without thinking about the heating.

Boost and holiday

Boost raises a room for 30 minutes up to 24 hours and then returns by itself. During a holiday all rooms drop to setback and preheat again before you return.

For whom: anyone who wants more warmth for a while or travels, without rebuilding schedules.

Presence and schedule

If nobody is there, the setback temperature applies. Otherwise the time windows set the temperature, outside them the room drops. Without either, the comfort temperature always applies.

For whom: every household – different for every room.

Solar power and cheap electricity

When there is a solar surplus or electricity is cheap, a room may raise its comfort temperature slightly – by at most 2 °C and never above 30 °C. Never with an open window, during a holiday or while away.

For whom: anyone who wants to store heat in the house while energy is cheap.

The order is fixed: window before boost, before holiday, before absence, before schedule, before comfort temperature. Then come preheating and lift, and last the hard limits: never below the frost limit, never above 30 °C.

What you see

Every room at a glance

Actual and target temperature, the reason in plain language, who is home, thermostat with valve and battery, trend and the next change.

Kepler and Hubble

How fast every room heats up and how long it holds the heat – and the lowest temperature of the coming hours.

Heating season

Outdoor temperature now, 24-hour mean and whether it is heating season. The thermostats are switched to heat or off by themselves.

Time windows and week band

Time windows per weekday, optionally with their own temperature, and the week band shows the whole week at a glance.

Explained

“How heating works” explains priority, window, holiday, lift and preheating right on the page.

On the dashboard

The heating card shows all rooms on the Home Assistant dashboard. Comfort temperature and boost can be changed there – also by family members without admin rights.

What always applies

  • Every new room starts in observe mode. Switching only begins once you activate the room yourself.
  • If you turn the thermostat, room heating does not fight back. The room pauses until someone comes or goes – or until you take it over again.
  • Never below the frost limit, never above 30 °C. Lowering at most once per hour to spare the thermostat batteries.
  • Only what your Home Assistant allows is changed: whoever may not operate the thermostats can only look. Creating and managing rooms stays with admins.
  • Everything stays local in Home Assistant. Room heating is a premium feature and is enabled in Solar Forecast EAI. The images show sample data.